Mini Mo' Club Dec 2013 - Lucky and Ray, Lucky and Tetra

I'm having a little catch up on my Mini Mo' blogging, it's been a while. Looking back to December, my first collection has Lucky Lobster and Stingray murrini. I've used Effetre Lime Green, Effetre Coral, CiM Khaki and CiM Adamantium.

The first piece I want to show is this chunky cabochon which features both Ray, Lucky and Tetra murrini over Effetre Pea Green, pixie dust and under 006 clear.

This fab Chrissie Crab focal has been created with the Adamantium canes in my Lucky and Ray collection.

Last up in this lush lime encased mini set. The core is light aqua covered with a twist of green ribbon cane and then encased in 006 clear.

My second collection from December features Lucky Lobster and Tetra Fish murrini. I have used Effetre Lime Green, Reichenbach Black, Vetrofond Periwinkle and Effetre Light Teal 026.

First up is this organic trio using the periwinkle cane over CiM Chalcedony glass.

Another Chrissie crab focal, this time using pea green cane from the Lucky and Ray collection.

My last bead for this post is a large teardrop shaped pressed tab created with the same pea green cane and all sorts of fun dot layering and raking techniques.

It is possible to join the Mini Mo' Club via Etsy for 3, 6, 9 or 12 month long subscriptions. Please check out my shop link for more info.

Frit N Chips lampwork supplies.

Have a lovely week, Jolene x

Mini Mo December 2012 - Hermie and Sammy Seahorse

My fist Mini Mo' collection for December includes two kinds of yummy aquarium murrini. First up are some wonderfully detailed Hermit Crabs paired with lovely Scallop Shell murrini. I have  used Effetre Carrot Red 424, Dark Ivory, Coral 420, Green Olive transparent 025 and Lime Green 419.

This ready to wear sea themed necklace shows what the Hermit Crab Murrini look like under encasement. I have made a trio of necklaces in this style using a mix of all four of my new aquarium murrini.

This set of handmade coin shaped beads shows the Crabs and Scallop Shell murrini as raised decoration. I have used CiM Peachy Keen and CiM Count von Count as my base colours.

There is also a new short free tutorial on applying figurative murrini as raised decoration, you can see it here.

My third bead image for this collection shows a few of my bracelet beads with twistie cores form my Harry Mini Mo'. The twistie has been thickly encased and the beads further decorated with layers and layers or tiny dots.

My second collection for December is also sea themed. This time I have made tiny green Seahorse murrini and teamed them up with Conch Shell murrini. This glass work has been created using Effetre Lime Green 212, Green Olive Transparent and Dark Ivory along with Effetre Chocolate Brown.

Here is another of my ocean themed necklaces, this one shows a Sammy Seahorse murrini under a layer of Effetre 006 encasement.

The second set I want to show you today are these scrummy Seahorse and Conch coin beads where the murrini has been left as raised detail as shown in my recent blog tutorial.

This last picture shows a set of 6 twistie cored bracelet beads using the canes from Sammy Seahorse Mini Mo'. They each contain wraps of twistie over and Effetre clear core which has been thickly encased. I have decorated each further with layered dots and hearts


Jolene x

Frit N Chips lampwork supplies Kitzbitz Art Beads Buzzword Bracelet Beads

Zoozii tab trio press and applying figurative murrini as raised decoration

In this tutorial I will be showing you a nice way to use the Zoozii slim straight sided lentil  trio (tab) press and a Zoozii wave texture plate (pictured above) on the reverse side if these beads to add a little interest and sparkle to the finished bead. Most of the instructions on how to apply the figurative (picture) murrini will be in text rather than images as I found it quite impossible to take pictures whilst holding both mandrel and tweezers - maybe when I get round to making a tutorial on encased figurative murrini I will try and rope in my lovely and patient OH to take some snaps.

Step 1

Lay out some murrini ready to use.  It will save you time and make things easier later if you put them all face side up and turn them the same way round as you would like to lay them on a bead. I am not pre-warming these murrini as they are quite small, all less than 6mm which I find work fine without for me. Anything larger than 6mm will likely require pre-warming on a hot plate (or mug warmer) or failing that on top of your kiln or a torch top marver prior to use. Make sure you have your murrini sitting in a place where you do not have to reach in front of the flame to reach them.

Step 2

Prepare your press base, put in a place on your work surface where you will feel comfortable working with it, close to your torch but not where you will not have to reach in front of the flame to use it. This will save you moving it about later with the hot bead that you are wanting to press in your hand.

Step 3

Warm your mandrel and add 2 or 3 small wraps of glass side by side.

Step 4

Roll out the wraps of glass on a graphite tile, with a graphite paddle or on a torch top marver to form an even cylinder shape.

Step 5

Measure up your  cylinder against the cavity in the handle of your press. If your cylinder was a little short like mine is here, warm it up until glowing and roll it out some more. You need your base to be about 1mm short of the full width of your press.

Step 7

Wrap second layer of glass around the middle 2/3 of your base cylinder. Warm the whole bead until glowing.

Step 8

Press your hot bead in to the cavity on the handle part of your press, turn it over and then press the other side too.

Step 9

Add a very small dot of glass to the top and bottom of your bead and then heat the whole bead until glowing.

Step 10

Place your bead in the base of your press and align the top with the base and make your final press with both parts of the tab trio

Step 11

Flame polish out any chill marks cause during the pressing process and then heat one face of your bead until glowing.

Step 12

Press the glowing side of your bead down firmly onto your texture plate.

Step 13

Next turn your torch down a bit and spot heat the non textured side of your bead until glowing brightly. Pick up your picture murrini with long nose tweezers or murrini hemostats and place it firmly on the  glowing area of your bead. This should be done outside of the flame. I tend not to flash picture murrini smaller than 6mm through the flame as they are cut so thinly that they seem to cope well enough without.

Lastly heat the surface of the murrini gently in the top of a low flame to flame polish, pat gently once, quickly flame polish again. Turn your torch back up and the flame bathe your entire bead in the top of the flame then pop it in the kiln.


These lovely little CiM Dirty Martini Seahorses anlong with my new range of aquarium murrini are now all available in my Etsy supplies shop.

Jolene x

Frit N Chips lampwork supplies Kitzbitz Art Beads Buzzword Bracelet Beads